金牛网首页 金牛网首页

Surface water treatment processes

http://m.stcytz.com/processes/surface/surface-water.htm
梦之城,乐投letou,乐福彩票平台官方网站,金牛网首页叫座大教堂科威尔

Due to the high cost of drinking water and the fact that water is not always available, more and more industries and municipalities use treated surface water. Normally the surface water needs to be treated before it has the required water quality. Surface water typically contains a high suspended solids content, bacteria, algae, organic matter, creating bad taste and odour. In some areas, like river estuaries, surface water can be brackish, reaching up to 8000 mg/L of salts.

Two processes are commonly used to treat surface water:

- Conventional treatment including clarification (coagulation/flocculation, sedimentation or dissolved air flotation), sand filtration, activated carbon adsorption and disinfection.

- Advanced treatment based on ultrafiltration technology.

Surface water treatment processes

Special attention is brought to disinfection since surface waters contain a wide range of coliforms (E.Coli), viruses and protozoa. The use of chlorine should be used with care since it reacts with natural organic matter to form disinfection by-products like trihalomethanes.

Lenntech (European Head Office)

Distributieweg 3
2645 EG Delfgauw
The Netherlands
Phone: +31 152 610 900
fax: +31 152 616 289
e-mail: info@lenntech.com


Lenntech USA LLC (Americas)

407 Lincoln Road, Suite 11-C
Miami Beach, FL 33139
Phone: +1 877 453 8095 (speaks English & Spanish)
e-mail: info@lenntech.com


Lenntech DMCC (Middle East)

Level 5 - OFFICE #8-One JLT Tower
Jumeirah Lake Towers
Dubai - U.A.E.
Phone: +971 4 429 5853
e-mail: info@lenntech.com


Copyright ? 1998-2020 Lenntech B.V. All rights reserved

梦之城 金牛网首页